HOWTO: Configure your pfSense Firewall

This page will guide you through the configuration of a pfSense firewall to get the best performances out of reemo and allowing you and your users to get a direct/udp connection with Reemo.

Get started

To get started, connect on the web administrator interface and open the Firewall > NAT menu

../_images/pfsensemenu.png

NAT Configuration

Open Firewall > NAT > Outbound and select the Hybrid Outbound NAT option and click Save

../_images/pfsensenatmenu.png

Add a new Mapping Rule in the Mappings panel

../_images/pfsensemappingwindow.png

Configure your new Mapping Rule like below:

../_images/pfsensereemorules.png

Ensure the Static Port option is enabled, click Save and Apply Changes